T-Shirt Press

Instructions:

MaterialTime (Seconds)Temperature (°F)
Pure Cotton25–30s360–430
Polyester25s360–430
Pearl Board10–15s300–360
Key Chain40s430–450
Mouse Pad25–30s360–430
PVC Board40s360
  1. Turn on the heat press by pressing the power switch into the ON position. Open the panel (otherwise the machine will utter "beep" sound as a reminder).
  2. Set the target temperature: Press the "TEMP" button, then press the up or down arrow (^ or v) to set the desired temperature; then press the "TEMP" button again to lock it in.
  3. Set the target time: Press the "TIME" button, then press the up or down arrow (^ or v) to set the required time and press the "TIME" button again to lock it in.
  4. Wait til the heat press heats to the target temperature.
  5. Close the panel, pre-heat the silicone pad for about 30 seconds.
  6. Open the panel, place your garment (with image) on the bottom platen/silicone pad so that it is flat and there are no wrinkles in the material. The garment should be set evenly across the surface.
  7. Proceed by closing the handle downward into the locked position.
  8. Open the handle when automatic timer buzzes.